71
21.
Gather the cowl and provided air exit hole
templates as shown.
22. Tape the cowl templates to the bottom of the
cowl as shown.
Note:
For standard style mufflers you will only
remove the three rear air exit holes.
23.
Use a felt tip pen to trace the cowl cut outs on
to the bottom of the cowl as shown.
Note:
Remember
not
to cut away the front air exit
holes.
Note:
Take care and test painted areas prior to
using any type of paint remover, rubbing
alcohols or cleaners to remove any pen lines
24.
Cowl cooling air exit holes cut lines marked
ready to cut.