9
1. Go over all seams and color overlaps with your
sealing iron.
Note:
Even if your models covering has no wrin-
kles out of the box it is still very important to go
over all seams and overlaps to make certain they are
sealed securely. This is especially important at the
leading edges of the wings and stabs. We recom-
mend checking the covering after each flying ses-
sion.
CHECKING SEAMS AND COLOR OVERLAPS FOR GOOD SEAL
2. Use your covering iron to ensure all edges,
seams, and color overlaps are securely sealed.
3.
This is an optional step but is recommended
.
Cut strips of clear covering to fit the hinge
gaps. Use covering iron to seal the clear
covering snugly into the bottom of the
hinge lines as shown for air tight hinge
seals.
IMPORTANT
:
It is the users responsibility to check the
covering seams and overlaps for security and a
good seal. Aeroworks is not responsible for
failure of covering seams or overlaps during
flight.
This is a never ending process that must
be done after each flying secession. Due to
varying temperatures and humidity changes
from day to day the covering will continue to
loosen and must be maintained.
