6
Right Wing with Aileron, Flap – covered:
Pre-drilled
for the mounting of the control horns
6-32 blind nuts installed for the main retracts
mounting
(2) 4-40 blind nuts installed for the pedestal of
fuel tank and bomb mounting
(5) pin point hinges glued – for aileron
(5) pin point hinges glued – for flap
(1) front locater pin installed
(1) Plywood Wing Bolt mounting pad – covered
and glued
(3) Dummy Guns – vacuumed and glued
(2) aileron and flap servo hatch cover installed by
(8) T2.6x8mm wood screws
(1) main landing gear hatch cover installed by (4)
T2.6x8mm wood screws
Horizontal Stabilizer with elevator assembly with
(10) pin point hinges (glued)---covered
Elevators Pre-drilled for the mounting of the con-
trol horns
Rudder with (5) pin point hinges (not glued) – cov-
ered
Rudder Pre-drilled for the mounting of the control
horns
SUB ASSEMBLIES:
#1:
Main Retractable Gears system – installed in the
wing
#2:
110mm dia. rubber main wheels with aluminum
hub– pre installed
#3:
Pneumatic System for retracts – pre installed
Air Tank, Air Lines, Air Valves, Electronic Se-
quencer, (2) mini servos for sequencer
#4:
Retractable Tail Wheel – pre installed
Rubber tail wheel with aluminum hub– pre in-
stalled
#5:
(1) Fiberglass Cowling w/ inside ring glued—painted
with (6) bolt holes drilled and Bolt inserts preinstalled
(6) 4-40x16mm hex style bolts for mounting cowling
#6:
(1) Bottom Air Scoop – painted with (2) holes drilled
for the wing bolts to go through
(2)12.5x95mm fiberglass tubes for the wing bolts
guides
(1) Template for marking location of bottom air
scoop
(1) Bottom Front Fuse Fillet - painted
#7:
(2) Mounting Pedestal for bomb and tank – fiber-
glass – painted and preinstalled 4-40 blind nuts
(2) Dummy Bombs – fiberglass – painted with bolt
holes drilled
(2) Dummy Tanks – fiberglass – painted with bolt
holes drilled
(4) 4-40x16mm hex head bolts for pedestal mounting
(4) 3mm split ring lock washers for pedestal mount-
ing
(4) 3mm flat washers for pedestal mounting
(4) 4-40x16mm Hex Style head bolts for bombs or
tanks mounting
(4) 3mm split ring lock washers for bombs or tanks
mounting
(4) 3mm washers for bombs or tanks mounting
#8:
(4) 4-40x2-1/2” right hand and left hand threaded
pushrods with nuts for ailerons and flaps
(2) 4-40x3” right hand and left hand threaded push-
rod with nuts for elevators
(1) Wrench for the right hand and left hand
threaded pushrod
(2) 4-40x300mm Threaded Pushrods
(2) 4-40 solder coupler with nuts
(2) 4-40 Metal Clevises
(14) 4-40 ball links
(14) 4-40x16mm hex style bolts
(14) 4-40 lock nuts
(8) Brass Spacers
(14) 3mm flat washers
#9:
(2)1x1100mm plastic coated pull-pull steel cable for
rudder
(2)1x750mm plastic coated pull-pull steel cable for
tail wheel steering preinstalled to tail wheel
steering arm tiller
(6) 4-40 Ball links
(6) 4-40x16mm hex style bolts
(6) 4-40 lock nuts
(4) 3mm flat washers
(6) Threaded Couplers
(6) Brass Swags
(8) AL Double Control Horns
(24) T2.6x16mm ailerons and flaps Control Horn
Mounting Screws
(24) T2.6x8mm rudder and elevator control horn
mounting screws
#10:
(1) 750cc Gas Fuel Tank Assembly
(2) Brass Barbs for fuel line
(2) Fuel filler Dot – 1 male and 1 female
