81
1. The amount of control throw should be adjusted
using mechanical means as much as possible and
then electronically with the radio. The control
throws are shown in degrees and inches of de-
flection measured at the widest point of the con-
trol surface for both low and high rates.
CONTROL THROWS
2.
Use the
supplied
flight control deflection meter to
measure the throws in degrees
. Prop up the tail of
the aircraft until the fuselage is parallel to the
table top.
3. Location for throw meter to measure Aileron
throw in degrees.
4. Location for throw meter to measure Flap throw
in degrees.
5.
Location for throw meter to measure Elevator
throw in degrees.
