Aeroworks 60cc Freestyle Extra 260 Assembly Manual
37
14. Before installing the tuned pipe it may be neces-
sary to shorten the header. Test fit the tuned pipe
and header assembly in the fuse to check if your
tuned pipe/header combo will need to be short-
ened. Please refer to tuned pipe/header manufac-
tures instructions before shortening the header.
15. Assemble the tuned pipe and header as shown.
Please refer to exhaust manufacturer instructions
for proper header length and header to pipe spac-
ing.
16. Slide pipe into fuse, if may be necessary to ro-
tate the pipe slightly so it can move through the
fuse.
17. Reinstall motor to standoffs and secure mount-
ing bolts with a drop of blue loctite.
12. Install the silicone canister supports in pre in-
stalled rear pipe mounting bracket as shown. The
rear pipe mounting bracket is built into the fuse,
no further steps need to be taken for its installa-
tion.
13. Remove engine from standoffs, this will allow
the pipe to be installed in the fuse easily.
