Aeroworks 60cc Freestyle Extra 260 Assembly Manual
43
8. Using a nylon tie, install the ignition battery in-
side motor box as shown.
6. Secure ignition module with nylon ties as neces-
sary.
7. Secure ignition pick up lead with Aeroworks
safety clip and secure wire to engine stand offs
to prevent wires from touching hot engine or
rubbing against inside of cowl.
9. Using a small piece of hook and loop material,
secure the Smart-Fly ignition regulator to the en-
gine box floor.
10. Mount ignition switch in accordance with the
switch manufacturers instructions and hardware.
Note:
Ensure ignition switch location does not
interfere with the mounting of the wing.