6
Aeroworks 60cc Freestyle Extra 260 Assembly Manual
Receiver Power System:
The Aeroworks 50cc Power Package is recom-
mended. The package consists of the following
items:
1 -
Fromeco Sahara Regulator w/Deans in 2 JR out
1 -
Fromeco 5200mah Li-Ion Battery w/ Deans
1 -
Smart-Fly Super Switch HD w/ Deans
Ignition Power System:
If using the DA 50 or any other gas engine the
Aeroworks Ignition Power System is recommended
1 - Fromeco 2600mah Li-Ion Battery w/
Universal Connector
1 - Smart-Fly Ignition Regulator
1 - MPI charge switch
Recommended Extensions:
22 AWG extensions are recommended throughout
the 60cc Extra 260 Freestyle QB-L. The following
sizes will be used:
2 - 6” Extensions For Aileron Servos
2 - 6” Extensions For Receiver To Wing
1 - 12” Extension For Throttle
2 - 36” Extensions For Elevators
Note:
Extensions available from Aeroworks
TOOLS & ADHESIVES NEEDED
TO COMPLETE
Allen wrenches US and Metric.
Electric drill and selection of bits
Razor saw
Flat head screwdriver
Hobby heat gun
Hobby iron and covering sock
Masking tape
Modeling knife
Needle nose pliers or crimping tool
Paper towels
Pen, pencil or felt tipped marker
Phillips screwdriver
Rubbing alcohol
Ruler and tape measure
Scissors
T pins
Wire Cutters
Blue Loctite
CA kicker (optional)
Thick, Thin and Medium CA
Epoxy (15 min / 30 min)
Rubbing alcohol
Wipes
WARNING
Some rubbing alcohols
may attack painted parts.
Always test painted areas
before using.