42
3. If standard style mufflers are to be used, install
the standard mufflers to the engine cylinder
heads. Attach the throttle pushrod to the engine
throttle arm as shown. Layout the location of
the throttle servo and throttle pushrod. Ensure
the servo and pushrod do not interfere with the
standard mufflers.
4. When the final location of the throttle servo is
determined use a pencil to trace the outline of
the servo onto the bottom of the engine box as
shown.
5. Use a rotary cutting tool to cut out the throttle
servo mounting hole.
Note:
Cover engine with a towel or cloth or use
masking tape to protect from any debris
getting into the carburetor or cylinders.
6. Thread a 4-40 ball link half way onto the
threaded coupler as shown.