61
9. Secure the rubber stopper with set screw. Take
care not to strip threads by over tightening set
screw
10. If using both the fuel and smoke tanks position
them side by side as shown below.
Fuel Tank Installation
1. Gather the fuel tank parts as shown below. Fuel
tank, fuel tubing, foam rubber, fuel “T”, fuel
filler dot, fuel filter and nylon ties.
Note:
The fuel “T”, fuel filter and filler dot are not
supplied, but are available through
Aeroworks.
2. Install a short piece of fuel line and the fuel “T”
to the fuel pick up tube.
Note
: Using a heat gun and or soapy water solu-
tion to soften the fuel line will help with the
installation of the fuel “T”.