63
8. Gather the fuel filler dot and drill bits as shown
below.
Note:
We recommend you start with a smaller size
drill bit then increase the bit size to the
correct size to fit your filler dot. This will
help prevent the fuse side from splitting
or
cracking.
7. Route the line to the engine carburetor out of the
bottom of the engine box. Use rubber grommet
where the fuel line goes through the plywood to
prevent fuel line chafing. Secure all fuel lines
with nylon sip ties.
9. Install fuel filler dot as shown below.
Note:
Install the fuel dot above the tank center line,
this will prevent fuel siphoning out during
fueling.
10. Install fuel vent line as shown below. Using rub-
ber grommet for a professional finish.