68
Note:
The following steps are if you are using
standard style mufflers. If using
canister or
pipe
exhaust skip to page 72.
2. Measure and mark the center of the template as
shown below.
3. Measure and mark a center line on bottom of
fuse as shown below.
4. Align centerline marks of template and fuse. Use
masking tape to securely hold the template to the
fuse.
1. Gather the following material for making a cowl
cutout template.
Hobby Knife, Ruler, Tape, Felt tip pen or marker
Template material has been supplied.
COWL INSTALLATION-STANDARD MUFFLER