74
1.
Gather the Lower wing tubes as shown below.
Look for the pre marked reference letters
( Right-Left) and insert wing tubes into their
respective wing panel. Using this reference will
ensure proper fit and will aid in the assembly of
your model at the field.
PRE-FLIGHT PREPARATION
2. Insert wing tubes as shown, ensure the predrilled
mounting holes are facing toward the top of the
wing.
3. Secure the tubes in the wing with the provided
6-32 mounting bolts and bonded washers.
4. Slide the wing tubes into the fuse as shown, se-
cure aileron extension with Aeroworks Safety
Clip.