Making a call
Dial a phone number using your phone and the audio will be
played through the car speakers.
Answering a call
If there is an incoming call, press
key to answer the call.
You can switch between mobile phone microphone and the
Bluetooth Car Chargers microphone when in a call by pressing
the
key. Press
key to hang up.
Callback
Press
key twice to call back the last number called.
Reject a Call
You can reject a call by pressing the
key.
Play music in your phone
This product supports A2DP function, which allows you to play
music in your phone. Music will be transmitted to your car audio
via the FM function of the product so that you can enjoy music
high quality music. Press
key to play/pause music on your
phone and press
for the next/last song (NOTE: Some
phones with a lower system version may not support this
function).
Audio input mode
Insert the line in cable with one end inserted to the sound source
end and the other end to the product audio hole.
Press
to turn up/down the volume and press and hold
it to turn up/down volume quickly.
Power-off memory
Every time the FMT250 Bluetooth Car Charger is powered off,
the system will memorize the FM frequency and it will connect
to your phone via Bluetooth automatically in order to facilitate
your usage.
Technical Parameters
Rated working voltage
12V
Limit working voltage
9 ~ 26V
USB output
5V/2.1A
Working temperature
0~50
℃
SNR
>60dB
Degree of distortion
<0.1%
Frequency response
20Hz-15Khz
Resolution of right and
left channel
>60dB
Bluetooth version
Version 2.1+EDR
Bluetooth sound
processing
A2DP (Advance Audio Distribution
Profile) function supported
Bluetooth transmission
distance
10 Meters
Effective distance of
Bluetooth microphone
0.5~2 metres
FM frequency
87.5~108Mhz
FM Mode
Stereo digital PLL frequency
locking
Attention/Warning
This product contains dual USB outputs. It can charge two
devices at the same time with the maximum output of
5V/2.1A.
The Bluetooth Car Charger will connect automatically with
the phone via Bluetooth when turned on. If LINE is used
after Bluetooth connection, LINE mode will be used instead.
Never turn the volume to be too loud (generally at 28 or
below) when FM is working to avoid the sound distortion.
Please adjust the sound volume through the car audio.
A built-in antenna is provided for the product, so please
avoid using the broadcasting station frequency with a strong
signal so you can get better audio quality.
The procedure to pair your phone via Bluetooth may differ
depending on what phone you have.
Some phones may not support automatic connection if they
are powered on after a power failure. If this is the case,
please connect it manually.
This product is compatible with more than 95% phones on
the market but some are still incompatible. Please make sure
your phone is compatible with this product.
The volume should be proper during the call to avoid
affecting the other party.
Do not use this product in the environment with high
temperature, dusts or moisture.
Avoid dropping the product to prevent damage to the surface
or the body.
The Bluetooth of this product supports background play. If
there is a prompt tone when playing music with LINE
function, it will be automatically switched to the Bluetooth
mode. To return to LINE function, please pull and plug
LINE again.
What’s in the box
1. FMT250 Bluetooth Car Charger
2. User Manual
3. Auxiliary cable
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
Technical Asisstance
If you need assistance setting up or using your Aerpro product now or in the future,
call Aerpro Support Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm
AEST
Please retain this user guide for future reference.
