POWER-OFF MEMOREY
When the device is powered off it will automatically memorise the
frequency in use and the point where the music has stopped and will
resume playing from that point when powered on next time. However,
when the storage device have been changed, removed or when errors have
been detected, the system will automatically restore to the default settings.
REMOTE CONTROL
CH-
: Frequency down
CH+
: Frequency up
: Previous song
: Next song
: Play/Pause/ Answer or Hang up a call
-
: Volume -
+
:
EQ
: Choose different kinds of sound effect
0~9
: quick to pick up a song by pressing
number key
MODE
: Music player / Bluetooth
: Answer or Hang up a call
: Switch between Bluetooth and cell phone when on calling.
SPECIFICATION
Rated Voltage
12V
Limited voltage
9~26V
USB output
5V/2.1A
Work temperature
0~50
℃
Support file format
MP3 / WMA/WAV
SNR
>60dB
Degree of distortion
<0
．
1%
Frequency response
20Hz-15Khz
Left and right channel dB
>60dB
Bluetooth version
Version 2.0
Bluetooth feature
A2DP (Advance Audio
Distribution Profile)
Bluetooth Transmit distance
10M
Bluetooth microphone effective range
0.5~2M
FM Transmit frequency
87
．
5~108Mhz
Transmit frequency modulation mode
Stereo digital PLL
frequency lock
WARNING
Do not turn the FM transmitter volume too high to avoid voice
distortion (normally at 28 or below). Please use the volume on your
car audio system if needed.
Select a pre-set channel without signal interference.
Operation mode for Bluetooth may be different due to differences
from various mobile phones.
Some models of mobile phone won’t connect automatically after
powering is off and therefore require pairing again.
The device is compatible with 95% of the mobile phones in the
market, but not all. Please understand this before purchasing this
product.
During a phone call, the volume should be moderate to avoid
affecting the other end of the call.
Do not use the product in dusty, high-humidity or
extreme-temperature conditions.
Prevent the product from falling to avoid damage.
Do not open the product yourself. Please contact the distributor if
you require assistance.
Data in this manual is subject to alteration without prior notice.
This device will auto power off if no Bluetooth device is paired or
if there is no Micro SD card inserted.
TROUBLE SHOOTING
Device not powering on or nothing displayed when power is on
Check if contact between the device and cigarette socket is undone,
or if cigarette socket is rusty.
Check if fuse of the device has burned out. If yes, please replace
with same fuse.
Pull out the device from cigarette socket and plug in again.
Playing failure
Check if the Micro SD card connection is ok or retry with another
Micro SD card.
Check if the file format is correct. It can support MP3 or WMA
only.
Check volume is not set at ‘0’
Muting noise but no voice
Check if media player on your phone is on ‘PAUSE’.
Check if volume is on 0 or is low.
Bluetooth hands-free failure
Check if mobile telephone has been connected with the player.
No sound transmitted to car audio
Check if the device is in the transmitting state.
Check if the transmitting frequency is the same with receiving
frequency of the car radio.
Noise with transmission
Check if the pre-set channel has a strong signal; try to change the
FM Frequency to a channel without signal interference.
Remote control not working
Make sure you take off the battery bar paper.
Check if the battery has low power which may need to be changed.
WHATS IN THE BOX
1.
FMT260 Bluetooth Car FM Transmitter
2.
Remote control
3.
User Manual
Technical Asisstance
If you need assistance setting up or using your Aerpro product now or in the future,
call Aerpro Support Australia
TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm
AEST
Please retain this user guide for future reference.
