SO-20
Rev 00.00
Pag. 5 di 16
©| Aerservice Equipments S.r.l. | 2020 all rights reserved
é vietata la riproduzione del presente manuale, anche parziale.
INTRODUCTION
Par
Description
4
Glossary
This paragraph lists some terms which are not commonly used or with a meaning different from the common
one. The meaning of the abbreviations and pictograms used is described below. The abbreviations and
pictograms are used to indicate operator qualifications and state of the machine; they provide, in a quick and
univocal manner, the information necessary for the correct and safe use of the machine.
GLOSSARY
(Annex I point. 1.1.1 Dir. 2006/42/EC)
HAZARD
A potential source of injury or damage to health;
DANGER ZONE
Any zone within and/or around machinery in which a person is subject to a risk to his health or safety;
EXPOSED PERSON
Any person wholly or partially in a danger zone;
OPERATOR
The person or persons installing, operating, adjusting, maintaining, cleaning, repairing or moving machinery;
RISK
A combination of the probability and the degree of an injury or damage to health that can arise in a hazardous
situation;
INTENDED USE
The use of machinery in accordance with the information provided in the instructions for use;
REASONABLY FORESEEABLE MISUSE
The use of the machinery in a way not intended in the instructions for use, but which may result from readily
predictable human behaviour.
OTHER DEFINITIONS
STATE OF THE MACHINE
The state of the machine includes operating modes, for example automatic running mode, jog command,
stop, etc., the condition of the safety devices on the machines such as protection devices provided (or not
provided), pressed emergency button, type of isolation from energy sources, etc.
RESIDUAL RISK
Risks that persist despite the adoption of the protective measures included in the design of the machine and
despite the additional protective devices and measures adopted.
