17
REPLACEMENT PARTS
PART NUMBER
ActivePure
®
Cell Assembly.
49919
Steel Hose
49701
Laundry Pro Optional ActiveClean Port
49693
Laundry Pro Pre-Filter Kit
49771
Laundry Pro Replacement Pre-filter
49772/49897
To order replacement parts contact use this unit only in the manner intended by the manufacturer.
If you have questions, contact Customer Service at 800.572.0502 (U.S)
or 800.668.0763 (CANADA).
REPLACEMENT PARTS & SERVICE
WARNING
Use only replacement parts recommended by the manufacturer.
ActivePure Cell Assembly
Steel Hose
Pre-Filter Kit
Filter
Items included:
High Purity HSG.
Filter HSG. W/SCR
Registration Card
Instruction Sheet
Water Filter
Nylon Adaptor 3/4 MPT - 3/4 MHT
Water Connector Pack Cover
Carton
Corner Insert
Warning Label
Tape
Loctite #8702
Stainless Steel Hose
Filter Wrench
Bar Code Stock Label
ACTIVECLEAN
PORT
FOR LAUNDRY PRO
INSTALLATION INSTRUCTIONS
The ActiveClean Port for Laundry Pro includes the adapter hardware with attached tubing and
a Velcro
®
strap to conveniently store the tubing.
(A)
Installation is quick and easy. To use the
ActiveClean Port, hold a container under the tube and simply turn the valve clockwise. To turn
off the ActiveClean Port, turn the valve handle counterclockwise until it stops. Use the water
from the ActiveClean Port for cleaning surfaces such as countertops, bathrooms and hard
floors. Great for using with carpet cleaning equipment such as shampooers or extractors.
1. Shut off water at cold water faucet going to the Laundry Pro unit.
2. Turn the washing machine on to relieve pressure from the hoses.
3. Remove power adapter from wall outlet and set aside.
4. Remove the outlet hose from Laundry Pro.
5. Hand thread the ActiveClean Port couple to
OUTLET
connector on Laundry Pro.
Continue until it is as tight as possible by hand.
(C)
6. Finish tightening by using adjustable pliers (only tighten top fitting when attaching to
OUTLET
connector). Take care not to over tighten as over tightening may damage
the plastic threads of outlet fitting.
(C)
The valve stem should point to the left of the
Laundry Pro. The valve handle should be in the closed position
(pointing toward you).
(B)
7. Remove adhesive backing from the included Velcro
®
strap and place on bottom
of Laundry Pro from a convenient location.
(D)
8. Coil the tubing and secure it using the Velcro
®
strap.
(E)
9. Connect washing machine hose to ActiveClean Port connection. Hand tighten until
snug. While holding the ActiveClean Port bottom fitting with adjustable pliers, finish
tightening the hose with adjustable pliers.
(E)
NOTE:
If your washing machine requires water to flow through both the
HOT
and
COLD
valves
for proper operation, install a “Y” adapter to the ActiveClean Port. Please see page 11 of your
Laundry Pro owner’s manual.
10.
Ensure the ActiveClean Port is in the closed position.
(B)
11. Plug power cord into electrical outlet.
12. Turn on cold water valve and check for leaks. Tighten fittings as necessary
to stop leaks if found.
Water treated by your Laundry Pro unit is
NOT
approved for any internal
consumption such as drinking, bathing, brushing teeth, etc.
DO NOT
drink, ingest,
or internally consume the water from your Laundry Pro unit or washing machine.
DO NOT
provide water from your Laundry Pro to your pets or other animals.
CAUTION:
A.
B.
C.
D.
E.
NOTE:
Hold with pliers
while installing port
in order to prevent
fitting from rotating.
Aerus LLC | 5420 LBJ Freeway, Suite 1010 | Dallas, TX 75240
65-00523 VA-00551
ActiveClean Port
Replacement Pre-filter
