9
SYSTEM SET UP
4. Start your washer. The status light should illuminate blue after a few seconds.
NOTE:
Your Laundry Pro 2.0 will automatically turn on and off as your washing machine starts,
and stops.
1. Plug power cord into the wall outlet of your home’s electrical power system.
See page 4 for electrical requirements.
Status Indicator Lights
2. Turn on the cold water valve.
3. Check all hoses to ensure no water is leaking. Tighten if necessary.
WARNING
• Electrical Shock Hazard; when working with electrical connections, the appliance and surrounding area should be clean
and dry of any standing water; failure to follow these instructions can result in death, fire, or electrical shock
• Electrical Shock Hazard;
DO NOT
use an extension cord. Failure to follow these instructions can result in death, fire,
or electrical shock
