9
CHANGING FROM STANDARD TO SUPERVALVE PLUG:
SUPERVALVE
Remove Plug Wire .
Rotate Turret to Supervalve Position .
Insert into wall inlet .
UNIT WON’T RUN
• Is the filter installed?
• Is the hose handle switch in either “I” or “II” position?
• Is unit plugged in?
• Press unit reset button
• Is 24 volt connection plugged in?
• Check home circuit breaker
• If all the above does not solve the problem, call your nearest Aerus location for service
NO SUCTION
• Check for clogged power nozzle
• Check for clogged hose
• Check for dirty filter
• Check for full canister
• Check wall plumbing for clogs
• If all the above does not solve the problem, call your nearest Aerus location for service
POWER NOZZLE WON’T RUN
• Is the hose handle switch set in “II” position?
• Press nozzle reset button
• Is hose fully engaged in the wall and/or is the cord plugged in?
• Are all hose handle and wand connections fully connected?
TROUBLESHOOTING
SERVICE
For prompt service, call the nearest Aerus location on www.aerushome.com. Your authorized Aerus location offers you the best
in service both during and after the warranty period, as well as genuine Aerus parts and service.
All power units of the Aerus Centra Lux are certified by the Canadian Standards Association.
Every effort is made to ensure that customers receive an up-to-date instruction manual on the use of Aerus products; however
from time to time, modifications to our products may be made without notice and make the information contained herein subject
to alteration.
