8
LED DISPLAY
The LED Screen is used to display all current settings (see page 5) as well
as any maintenance reminders.
NOTE: If you are operating your central heating and air conditioning fan
or other ventilation system continuously, set the coverage up to
the total ventilated indoor area. Otherwise, set the coverage up
to the size of the room. Do not exceed the size of the ventilated
indoor area when setting the purifier level.
If a maintenance reminder or a service reminder appears, the backlight
will brighten and constantly flash until the Reminder Reset icon is pressed
or the service problem is corrected.
When maintenance is required, the Display Screen will brighten and flash and the Maintenance Reminder will appear.
MAINTENANCE REMINDERS
Unplug the unit before performing any maintenance procedures
WARNING
Replace Plate
The Purifier Plate is not functioning properly.
•
Replace the old Purifier Plate with a new Purifier Plate (available from your local VolIara Independent Business Owner)
PERFORM CLEANING
•
The perform cleaning CLEAN indicator will come on approximately every 40 days
•
Clean the Filter Assembly (See Page 8)
•
Vacuum the ActivePure Cell
•
Clean the Purifier Plate (see page 8)
•
Vacuum Top and Rear Grill openings
NOTE:
Be sure to press the Reminder Reset icon to clear the reminder following regular maintenance (see below)
When the CLEAN indicator starts flashing, it reminds you to clean the filter.
Follow the steps below to remove the filter and clean it. While powered on, hold the Reset button, approximately
three seconds, until you hear a beep sound alerting you that it has been cleared.
Hand Strap
1.
Unplug unit
2. Press the top of
the back cover to
release the back panel
3. Lift up to remove
the back panel
4. Use the included
screwdriver to
unscrew the Filter
Assembly
5. Lift the Filter
Assembly up and
out to remove
Modes (A·PURE / A·PURE+ /
Depart Room)
Purifier Coverage /
Depart Time
Fan Speed
(5 Levels)
Ion
Operation
Flicker:
Replace ActivePure® Cell
Red Light:
ActivePure® Cell Malfunction
Clean Filter
Assembly
