+ User Manual
surface. Spacers with a minimum height of 4 mm are needed to prevent shorting pins on the
bottom side of the cape.
Although BeagleBone and its capes are designed to form a stack of undetermined height,
there can only be a single BeBoPr and a single BeagleBone in the stack. The BeagleBone is
always the first board of a stack, and the BeBoPr cape is always the last, because neither
board has stack-through connectors.
Other capes can be stacked between the BeBoPr and the BeagleBone, but not all
combinations will work properly. This depends on the signals used by the other capes.
version 1.4.9 (09/04/14)
page 18