+ User Manual
References
[1]
The main source of information is
https://github.com/modmaker/BeBoPr
. It
contains the open source code for the Mendel 3D printer port.
[2]
Make sure to read and watch the wiki pages at
(
https://github.com/modmaker/BeBoPr/wiki
) for new information. These may
contain more up-to-date information and other useful links.
[3]
For on-line help and other links don't forget to visit and register at the BeBoPr
forum:
[4]
Charles Steinkuehler maintains an excellent blog about his MachineKit effort at this
http://blog.machinekit.io/p/machinekit_16.html
[5]
If you're going to run LinuxCNC, watch the ntp newsgroups 'emc-users' and 'emc-
developers' or register for the mailing lists.
version 1.4.9 (09/04/14)
page 43