V1
Page 8
8. User instructions
The examples below assume that the default user code is 1234.
9. Using the APP
The user can call the SIM number of the intercom from their
phone. If their number is stored then the device will hand up
the call without answering and trigger the gates or door with a
momentary trigger.
The user can also send the following SMS text messages to
further control the unit..
Press to trigger gates.
For gates set for automatic
closing, press to hold open
More buttons..
-Check gate status N/A
-Check signal strength
-Check stored numbers N/A
For gates set for automatic
closing, press to allow the
gates to close again.
Information
The App is available for Android
and Iphone devices called
GSM-Gate
.
Note: Before the app can be used,
the sim card number and SMS text
strings as shown above will needed
entered in the settings screen.
The App will send the SMS strings
for you, so you don’t need to
remember the codes.
