48
4MinX - User manual
55 000 061 - I
Coupling: When you enable M/S or Double M/S coupling, BUS routing of
theses inputs aren’t take in care. They are always decoding to stereo and send in
the mix down.
5.5.1. Audio lock potentiometers
Some potentiometers can be locked after adjustment: pan pot, stereo angle,
balance. The lock feature is available in the “Audio Input screen”.
That’s possible if
- The input is set in mono and you have a pan pot : Lock the pan
- The input is set in stereo or M/S: Lock the stereo balance
-The input is a DMS: Lock the side balance and rear balance
Before unlocking a potentiometer, it is better to find the original position if you
have changed by accident. The pop up window tells you the current value and
the stored value try to match them.
5.6. Snapshots
A snapshot is a “picture” of the current configuration. It is an easy tool to save a
working space quickly. A snapshot is backup of the current audio configuration,
it save microphone choices and audio output configurations.
If you should coming back or you use frequently same microphone
configuration, you don’t need to set manually all settings for this configuration.
The snapshot aren’t linked to a project, you can use the same snapshot in any
project.
One of typical use is to switch between ambiance and direct sound take, where
you need to change yours microphones and change recording configuration.
Here the list of setting takes in care in a snapshot:
Audio Inputs ( excepted limiter threshold )
Audio Input source name (label)
Audio Outputs
Channels coupling
Routing (Excepted Slate )
P1-P4 routing
Recording : Audio Files configuration
Monitoring presets
Summary of Contents for 4MinX
