6
Access to the management interface,
“web pages”
Once the IP address is known, enter it in an HTML browser, on a computer connected to the same LAN as the µScoop (all current browsers are
suitable). The home page of the µScoop then appears:
If the automatically set address is not
suitable for the subsequent operation, the
first thing to do is to configure “statically”
the addressing with suitable parameters
provided by the network administrator:
Click « Login » on the top right corner
of the page;
Select “
N
ETWORK
” in the menu bar
and click on “
E
THERNET
P
ARAMETERS
”;
Select the “Manual” mode, enter the
needed parameters and click “Save”;
At this moment you will lose control
because of the IP address change!
Enter now in the browser’s address
field the newly set IP address and
check that the change has been
performed successfully.
You can find more details on page 14.
