S
COOPY
+ S - User Manual
47
4.
Detailed operating mode – User interface
In local mode, the unit is operated thanks to a keypad and display on the front panel. The display is an
OLED graphic display.
Operating from the keyboard can be protected by a password (numeric sequence, that can be
programmed or erased by the user. In such case, the operation is in a "restricted" mode, without direct
access to settings or dialling. Only the profiles menu is accessible, for loading a profile or call a call
profile (
see later in 4.8,
Restricted operation mode
for more about the restricted mode
).
4.1.
Equipment start-up
Press the
key for at least 3 seconds to start up the unit.
During start-up, the unit displays temporary messages. This initialisation lasts around 30 seconds. Then
the main menu is displayed.
On this "base screen", transmission and reception audio levels are permanently monitored for the two
audio channels.
At this time, the unit can be operated and receive calls. It is also possible, using the menus, to change
settings and/or set up calls.
4.2.
Principles for the navigation
From the base screen, if pressing the
key the display switches to the highest level menu, called
"root menu"
1
.
Pressing
again brings back the base screen.
The LED indicators and the main keys surrounding the display are described above in 3.2.1, Front panel.
1 You can also press the
key
Network
interface
Current
coding
SIP registration
indicator
IP connection
indicator
Network
interface
Current
coding