S
COOPY
+ S - User Manual
77
Releasing/Hanging up
To stop a link and release the line, press the "hang up" key
. Confirmation is required; press the
key again for confirming (
this is a security to avoid an undesired release
).
The S
COOPY
+ S features an automatic release for AoIP connections: whenever a connection is
established, but the unit does not receive a stream for more than 30 seconds, it automatically
releases the link and comes back to the "idle" state. In this way the unit cannot stay "stuck" in a busy
state while for some reason the connection is permanently broken.
It is possible to amend this feature for Direct RTP connections: see 4.4.1 , "AoIP Parameters" section.
Quick redialing
Once a number (or two for ISDN links with two B channels) has been called, it is easy to redial without
having to type it again: press the
key, then scroll through the "history" (last dialled numbers) using
the joystick. Press again the
key when the desired number is displayed. This is especially efficient for
quickly redialling the last number called.
If you wish you can clear this history of calls: see the menu
Tools
/
Misc
/
Reset
/
Reset Call History
.
Using the directory
A quick way to dial is to use the "call profiles" in the directory.
Go to the "Directory" menu
/
Call Profiles
. Scroll with the joystick to reach the desired profile,
then press
to launch the call.
With this method you can at the same time: select the network interface, select a coding setup, and
of course recall the number(s) of the destination. Indeed the flexible profile management allows you
to include or not each of these elements in a call profile.
Dialing or releasing the coordination link
A call on the coordination channel is handled on a different way: you must use the sub-menu
Setup
/
Coordination
.
Enter the sub-menu: you are asked to dial the remote number.
Enter the phone number to call
1
, then press the "Call" key
.
For later releasing the line, the procedure is similar:
Enter the sub-menu: a message asks for confirming you release the line.
For effectively releasing the line, press the "Hang up" key
.
1 If needed, use the "+" sign before the country code for an international call.
