90
S
COOPY
+ S - User Manual
5.2.
Principles of operation with html pages
The picture below shows a typical page.
On top you find a bar of tabs corresponding to the various categories of functions and parameters for
the S
COOPY
+ S. Clicking a tab you access either a page, or a drop-down list for selecting a secondary
page.
These tabs and pages are detailed in the following chapters.
Under the bar can be found the information and adjustable parameters, with various selection or entry
modes for these parameters, grouped in blocks (each surrounded with a frame). On the right side, a text
area provides additional help and hints.
As a general rule, the displayed parameters are read when accessing the page, and are not refreshed
automatically
1
. To force a refresh, click the
icon: the data in the area or frame are read and
refreshed.
Exception: some data on some pages is however periodically and automatically refreshed. This
makes a modest bit rate, but you should exit the html pages if you want no traffic at all on the path
between S
COOPY
+ S and the control device.
Two tabs have a specific behavior:
"
S
TATUS
" is accessible without a login and some data are updated automatically.
"
A
LARM
" is also updated automatically, and goes red when an alarm is detected, while showing
the number of errors detected. You can see details by clicking the tab.
Access to tabs (other than "
S
TATUS
") requires logging in beforehand. If you click a tab without being
logged in, the login dialog box opens to allow you to enter the connection password. If it is blank, just
click the "
Login
" button.
1 This is on purpose, in order to avoid a permanent high rate of queries to the unit, which may be questionable in some situations.
Help area
Tabs
Refresh the
"SIP" block
