S
COOPY
+ S - User Manual
91
5.3.
"
S
TATUS
" tab
This tab leads to the "
S
TATUS
" page, which is also the home page. It provides an overview of the essential
settings and parameters, sufficient for basic monitoring.
This page is accessible without a log in, and without a password.
The link status is monitored dynamically; e.g. you can see call reception and releasing. It is also possible
to monitor calls that an operator is managing using the front panel.
The page displays the audio level of the two transmitted signals (encoder) and the two received signals
(decoder), shown as bargraphs with a 0 dB reference.
Refer to chapter 4.4.3 (
Audio
sub-menu) for more
details on the setting for this reference. The "Headroom" setting is adjustable using the "
A
UDIO
" tab.
Note: the goal of these bargraphs is to provide an indication on the presence and level of the audio
modulation. The measurement has a good precision for stationary signals (1 dB accuracy and
resolution), but the update rate is rather slow. As a consequence these bargraphs are not
appropriate for precisely monitoring a dynamic program, and they should not be considered an
alternative to real program meters!
One can find in the “C
ONNECTION
S
TATE
” section global transmission and reception quality indicators (for
IP links only). These are the same information that you can get from the front panel, as described above
in 4.11.1, “Display statistics about the IP transmission”.
The transmission quality indicator is not always available; this depends on the capability of the
remote codec.
Program level
Link
monitoring
Active transmission
interface highlighted