AETINA CONFIDENTIAL
UM-M3N1060-MN-v05
- 30 -
When
PWR_LEVEL
transitions from 1 to 0, the module must reduce power
consumption within 50 ms. In transitions from 0 to 1 the module may return to the
full power state within 250 ms.
The system should determine the values of the two power levels in the structure
based on the considerations of the maximum allowable current (10 A) through the
PWR_SRC rail limited by the capability of the MXM connector, and the maximum
allowable current of the battery. The system should drive
PWR_LEVEL
low whenever
a condition occurs that may cause the current through PWR_SRC to exceed 10 A, or
the total current drawn from the battery to exceed its limit. An example would be
that the AC adapter is inadvertently unplugged and the battery is running at a lower
voltage. In this case, the module, maintaining its higher power level, may draw a
current greater than 10A and damage the connector. Another example is a system
that contains more than one MXM module and operates at full power of each
module. When the AC adapter is unplugged in this case, the individual module may
not draw current more than 10A but the total current drawn from the battery may
exceed its limit. If the modules do not transition from high to low power in time, the
battery may be damaged.
Summary of Contents for GeForce GTX 1060
