ROBOTAPE 50 ME - LH
6. ABOUT THE USE
6.1. RECOMMENDATIONS FOR OPERATION AND USE
‒
Before performing any operation, the operator must make sure that he/she understood the "Instructions
for use".
‒
When using the machine for the first time, the operator must read the manual and identify the controls
and simulate some operations, especially the start-up and shutdown.
‒
Check that all safety devices are installed correctly and in good working order.
‒
Only implement the uses intended by the manufacturer and do not tamper with any device to obtain
performances different from the intended ones.
6.2. CONTROL DESCRIPTION
The illustration shows the main controls
of the machine and the list shows their
description and function.
A)
Emergency stop push-button: it is used
to stop with a voluntary action, in case of
imminent risk, the organs of the machine
that may pose a rick.
For further details consult the paragraph
"Description of safety devices".
B)
Start button: it is used to start the
machine.
6.3. SWITCHING THE MACHINE
ON AND OFF
Proceed as indicated.
Switching on
1.
Turn the master switch
(A)
to
I (ON)
to
activate the power supply.
2.
Press the "start" button
(B)
to start the
machine.
Switching off
3.
Turn the master switch
(A)
in position
0
(off) to disable the power supply.
29/43
