ROBOTAPE 50 ME - LH
‒
N.
2
cutting levers springs.
‒
N.
2
cutting blades.
|
Important
Substitute the parts that are worn with genuine spare parts.
Use the oils and greases specified in the manual.
All these measures may guarantee the expected operating and safety level of the machine.
9.7. MACHINE DISPOSAL AND SCRAPING
|
Important
These operations must be performed by specialised personnel in accordance with the standards in force on
workplace safety.
Do not scatter non biodegradable products, lubricant oil and non-iron components (rubber, PVC, resins, etc.) in
the environment.).
Discharge them in compliance with current regulations.
Useful information for the disposal of machines and machine parts.
Scrapping must be performed by qualified personnel.
Construction material:
‒
Low-density linear polyethylene
(L.L.D.PE)
;
‒
Steel, aluminium and cast-iron;
‒
Copper and silver in the electrical/electronic components;
‒
Rubber, resins and fibres.
None of the component materials is harmful or poisonous.
Special care must be taken when disposing of leftover oil or grease from the motor reduction units.
Do not dump these materials in the environment and do not dispose of them as household refuse.
41/43
