23
in.k450
Troubleshooting section
An internal hardware error has been detected
Note the error message and contact dealer or service supplier
for Tech Support.
in.xm error codes
in.xe error codes
Description
The system has shut the heater down because the temperature
at the heater has reached 119°F (48°C). Do not enter the water!
Remove the spa cover and allow the water to cool down, then shut
power off and power your spa up again to reset the system. If problem
persists, note the error message and contact dealer or service supplier
for Tech Support.
The system does not detect any water fl ow while
the primary pump is running.
Check and open water valves. Check for water level. Clean fi lter.
If the problem persists, call your dealer or service supplier
A problem is detected with the temperature probe.
Note the error message and contact dealer or service supplier
for Tech Support.
Any other RH code
Note the error message and contact dealer or service supplier
for Tech Support.
Summary of Contents for in.k450
Page 3: ...2 in k450...
Page 27: ......
