Please keep this user manual for future use. It
will expire upon publication of a revised issue
however, so please check when using this manual
if you have the latest available version.
You can check with your distributor, dealer,
AF-X Systems BV or on the website:
www.af-x.com
User Manual AF-X Fireblocker Nano Series version 3.5
24
SECTION 4: FIRST AID MEASURES
Provided information based on extinguishing agent tablets contained in the unit (before initiation).
Note that the steel generator is constructed in such a way, that it cannot be opened. Exposure to,
and thus contact with, the extinguishing agent in tablet form is highly unlikely. In case however of
breaking or opening of a generator, evacuate people from the contaminated area and provide
maximum ventilation.
If extinguisher unit is initiated, the generator releases the fire extinguishing aerosol mixture. Although
only natural occurring and environmental neutral elements will be produced, the particle sizes in the
direct environment will be microscopically small, and for that reason requires protection for the
respiratory system.
Inhalation of small particles must be prevented as much as possible.
4.1.
Description of first aid measures
In general, in case of doubt or if symptoms persist, always call a physician. Never give anything by
mouth to an unconscious person.
In case of breaking or opening of a generator, evacuate people from the contaminated area and
provide maximum ventilation.
If inhaled
Inhalation of gas after ignition:
- Bring victim to well ventilated area
- Ventilate area
- Consult a physician
If inhaled
Inhalation of dust:
- Bring victim to well ventilated area
- In case of difficult breathing, apply extra oxygen
- Consult a physician
In case of skin contact with chemical content
- Remove large particles
- Rinse and wash with soap and water
In case of eye contact with chemical content
- Rinse eyes with water for a minimum of 15 minutes
- Consult a physician
If swallowed of chemical content
- Rinse mouth immediately with water, in case the victim is
conscious
- Consult a physician, and show this safety sheet
SECTION 5: FIREFIGHTING MEASURES
The unit itself is designed to extinguish fire!
IF MATERIAL IS HEATED TO THE SELF IGNITION TEMPERATURE OF 350
0
C, THE MIXTURE WILL REACT
INTO
A FIRE EXTINGUISHING AEROSOL THAT WILL PRESENT ITSELF AS A WHITE CLOUD.
THE
AEROSOL CLOUD WILL ITSELF BE AN EXTINGUISHING MEDIA FOR SURROUNDING FIRES.
5.1.
Extinguishing media
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Dry powder and dry sand are also suitable.
