Please keep this user manual for future use. It
will expire upon publication of a revised issue
however, so please check when using this manual
if you have the latest available version.
You can check with your distributor, dealer,
AF-X Systems BV or on the website:
www.af-x.com
User Manual AF-X Fireblocker Nano Series version 3.5
28
Eye protection
:
Safety glasses. In case of dust production:
protective goggles.
Safety glasses with side-shields
conforming to EN166 Use equipment for eye
protection tested and approved under appropriate
government standards such as NIOSH (US) or EN
166(EU).
Skin and body protection
:
Handle with gloves. Gloves must be inspected prior
to use. Use proper glove removal technique (without
touching glove's outer surface) to avoid skin contact
with this product. Dispose of contaminated gloves
after use in accordance with applicable laws and
good laboratory practices. Wash and dry hands.
Normal working clothes are suitable.
Body Protection
: Impervious clothing, the type of
protective equipment must be selected according to
the concentration and amount of the dangerous
substance at the specific workplace.
Respiratory protection
:
Carry operations in the open/under local exhaust/
ventilation or with respiratory protection to keep
airborne levels below recommended exposure levels.
Dust production: dust mask with filter type P2.
Where
risk assessment shows air-purifying respirators are
appropriate use a full-face particle respirator type
N100 (US) or type P3 (EN 143) respirator cartridges
as a backup to engineering controls. If the respirator
is the sole means of protection, use a full-face
supplied air respirator. Use respirators and
components tested and approved under appropriate
government standards such as NIOSH (US) or CEN (EU).
Environmental exposure controls
:
Avoid release to the environment. Emissions from
ventilation or work process equipment should be
checked to ensure they comply with legislation. In
some cases process modifications will be necessary
to reduce emissions to acceptable levels.
Other information
:
Keep product away from foodstuffs and beverages.
Do not eat, drink or smoke when using this product.
Take off contaminated clothing and shoes
immediately. After use: wash hands and apply hand
or skin care cream. Training staff on good practice.
Regular cleaning of equipment. Minimization of
manual phases.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1.
Device
Appearance
Form
:
Metal casing containing solid blocks
Colour
:
Metal
