Design and description
Assembly instructions
EN
CS 16 - CS 20
Date 01.06.2021
Version 6.0
29–64
5 Design and description
This chapter provides an overview of the CS modules’ structure and functioning.
Design Compact Slide
Fig. 8
Design of the CS module
1. Base body
4. C-slot for electr. Proximity switch
2. Slide
5. Application for sensors
3. Stop sleeve and shock absorber 6. Pneumatic connections M5
The shock absorbers used are precision-engineered parts. Do not overtighten
the fastening screw, otherwise the shock absorber may be damaged!
Product description
Compact slides of the CS 16 and CS 20 series are precision devices. In order
ensure safe and reliable operation it is important that the modules are handled
with care.
The compact slides are highly compact, pneumatic modules and are used for
the shock-free rotation of permanently mounted loads in the defined ambient
and operating conditions.
The assembly position of the compact slide can be vertical or horizontal.
The CS 16 - CS 20 modules consists of the base body (Fig. 8, 1) with the
pneumatic connections (Fig. 8, 6) and the cylinder that moves the slide (Fig. 8,
2). The end positions are each adjusted via a stop screw with integrated shock
absorber.
The end position can optionally be sensed by means of a
∅
4 mm PNP proximity
switch (not included in the scope of delivery,
instructions“). Alternatively, an inductive sensor (Fig. 8, 5) can be used.
1
2
3
6
3
4
5
5
