Decommissioning, disassembly, disposal
50 – 56
Assembly instructions EN
SA-3 I SA-3-FL I SA-6 I SA-6-FL
Edition 01/2021
Rev. 4.5
10 Decommissioning, disassembly, disposal
The telescope spindle axis must be properly dismantled after use and disposed
of in an environmentally friendly manner.
10.1 Safety instructions for decommissioning and disposal
10.2 Decommissioning
If the telescope spindle axes are not used for a longer period of time, they must
be properly commissioned and stored as described in
Chapter 4.5.
10.3 Disposal
The telescope spindle axis must be disposed of properly at the end of their
service life and the raw materials used must be recycled. Observe the legal
regulations and company requirements.
The telescope spindle axis must not be disposed of as a complete unit.
Dismantle the telescope spindle axis and separate the various components
according to type of material and dispose of them properly:
Scrap the metallic materials.
Hand over plastic parts for recycling.
Sort the rest of the components by their material properties and dispose of
them accordingly.
WARNING
Risk of injury due to improper decommissioning and disposal!
Improperly carried out activities can result in considerable material damage
and serious injury.
Only use trained specialist personnel to carry out the activities.
Disconnect the media supply (electrics, pneumatics) before removing the
modules!
Only remove the module when the control unit is switched off and secured!
NOTICE
Risk to the environment due to incorrect disposal of the packaging
material of the telescope spindle axis!
Environmental damage can be caused by improper disposal of the telescope
spindle axis.
Electronic parts, electrical scrap, auxiliary and operating materials must
be disposed of by approved specialist companies.
Information on proper disposal can be obtained from the responsible local
authorities.
Summary of Contents for 50113773
Page 54: ...54 56 Assembly instructions EN SA 3 I SA 3 FL I SA 6 I SA 6 FL Edition 01 2021 Rev 4 5 ...
Page 55: ...Assembly instructions EN SA 3 I SA 3 FL I SA 6 I SA 6 FL Edition 01 2021 Rev 4 5 55 56 ...
Page 56: ...56 56 Assembly instructions EN SA 3 I SA 3 FL I SA 6 I SA 6 FL Edition 01 2021 Rev 4 5 ...
