Afag 50289595, Assembly And Operating Instructions Manual

Safety instructions

10 – 40 

Assembly instructions EN  



SG-50  



Edition 01/2021  



  Rev. 2.0

2.4.3  Obligations of the personnel 

All personnel working with the servo gripper are required to: 



  read and observe these assembly instructions, especially the chapter on 

safety, 



  observe the occupational safety and accident prevention regulations, 



  observe all safety and warning signs on the servo gripper, 



  refrain from any activity that might compromise safety and health. 

In addition, the personnel must wear the personal protective equipment 
required for carrying out their work (



Chapter 

2.6). 

2.5  Personnel requirements 

2.5.1  Personnel qualification 

The activities described in the assembly instructions require specific requisites 

at the level of professional qualifications of the personnel.  
Personnel not having the required qualification will not be able to asses the risks 

that may arise from the use  of the servo gripper thus exposing himself and 

others to the risk of serious injury. Therefore, only qualified personnel may be 

permitted to carry out the described activities on the servo gripper. 
Persons whose ability to react is restricted due to the intake of medication or the 

like must not interact with the servo gripper. 
These installation instructions are intended for skilled personnel (installers, 

system integrators, maintenance personnel, technicians), electricians and 

operating personnel. 
The following is a description of the professional skills (qualifications) required 

for carrying out the different activities: 

Qualified personnel: 

Qualified personnel with appropriate training who are qualified due to their 

special know-how and fully familiar with the machine and who have been given 

instructions on how to carry out the task entrusted to them safely. 

Qualified electrician: 

Persons who have obtained their electrical qualifications through appropriate 

professional training and complementary courses that enables them to identify 

risks and prevent possible hazards resulting from electricity. 

Operator (trained personnel): 

Authorized persons  who due to their specialized professional training, 

expertise and experience are capable of identifying risks and preventing 

possible hazards arising from the use of the machine.