background image

 

 

 

EU-20-OI-v-1.2 gb. 28.07.14.docx

 

 

31 

 4.6

  

Disassembly and repair

 

When the module is damaged it can be returned to Afag Automation AG for repair.  

 

CAUTION

 

 

Switch off and secure the control system before the EU-20 elec-
tric gripper is removed out of the system. 
Disconnect  the  cables  only  after  the  control  system  was 
switched off.

 

 

NOTE

 

 

If the module turns out to be faulty during the warranty it must 
be returned to Afag for repair.  
Afag Automation AG offers a reliable repair service.  
Please  note  that  Afag  does  not  warranty  for  modules  which 
were not repaired by the Afag Automation AG.

 

4.7  Disposal 

NOTE

 

 

EU-20 electric grippers which ca not be used any more must not be 
disposed of as a complete unit, but must be disassembled and recy-
cled according to the type of material. Materials than ca not be recy-
cled must be disposed of in accordance with the legal regulations. 

 
5.0  Appendix 

5.1 

Liste of figures 

Figure 1: Module description ...................................................................................... 8

 

Table 2: Installation and mounting options ............................................................... 10

 

Figure 3: Dimensional drawing EU-20 ...................................................................... 18

 

Figure 4: Table of the connecting cables .................................................................. 20

 

5.2  List of tables 

Table 1: Tightening torques for bolts ........................................................................ 11

 

Table 2: Scope of delivery ........................................................................................ 16

 

Figure 3: Technical data EU-20 ................................................................................ 19

 

Table 4: Maintenance work....................................................................................... 29

 

 

 

Summary of Contents for 50346017

































Reviews: