Page 10
2017-01-13
Release: 02.0
Instruction
All persons working at the aflex as well as persons who are em-
ployed under the Temporary Employment Act have a duty to co-
operate for safety and health protection at the workplace. You
must be instructed about using the aflex.
Instruction
Reasonably foreseeable misuse, the dangers for the user, third parties
or for the
aflex can bring along with it:
a) The feeding of components whose size and geometry differs
from the size and geometry provided for the aflex
b) Operating the aflex outside the physical application limits de-
scribed in chapter "Commissioning / Operation"
c) Improper assembly, commissioning and operation of the aflex.
d) Changing the control software without prior consultation with
the manufacturer
e) Operating the aflex at or with obvious faults and / or defects.
f) Cleaning work without observing the safety precautions for
aflex work on site.
g) Improper assembly, commissioning and operation of the aflex.
Instruction
No modifications or alterations to the aflex base device may be
carried out without the manufacturer's approval.
Instruction
Any further use or constructional alteration is deemed to be inap-
propriate and will lead to the termination of the warranty claim.
3 Description of the device
General
The aflex system consists of an aflex and a modular control system. This control unit
consists of individual control modules, which, mounted on a DIN rail, communicates
