General
Assembly instructions
DE
EPS Handling systems
Date 08.09.2021
Version 2.0
9–112
1.4 Applicable documents
Each EPS handling system is accompanied by a safety information sheet.
This information sheet must be read carefully by every person who carries out
work on and with the EPS handling system.
Please also observe the installation instructions for the integrated modules!
1.5 Warranty
The warranty terms for Afag handling components and handling systems are
the following:
24 months from initial operation and up to a maximum of 27 months from
delivery.
Wear parts are excluded from the warranty (The customer is entitled to a
product free of defects.
This does also apply to defective accessories and
wear parts. Normal wear and tear are excluded from the warranty.
The warranty covers the replacement or repair of defective Afag parts. Further
claims are excluded.
The warranty shall expire in the following cases:
Improper use of the handling system.
Non-observance of the instructions regarding assembly, commissioning,
operation and maintenance of the module.
Improper assembly, commissioning, operation and maintenance.
Repairs and design changes carried out without prior technical instructions of
Afag.
Removing the serial number from the product.
Using the EPS handling system without shock absorbers or with defective
shock absorbers
Inadequate checking of wear parts.
Non-observance of the EC Machinery Directive, the Accident Prevention
Regulations, the Standards of the German Electrotechnology Association
(VDE) and these safety and assembly instructions.
Disasters caused by foreign bodies and force majeure.
1.6 Liability
No changes shall be made to the EPS handling system unless described in this
instructions manual or approved in writing by Afag.
Afag accepts no liability for unauthorized changes or improper assembly,
installation, commissioning, operation, maintenance or repair work.
