Commissioning
92 – 112
Assembly instructions EN
EPS Handling systems
Date 08.09.2021
Version 2.0
6.4 Settings
The EPS system is a precision mechanical device.
Please proceed with the necessary care and cleanliness during the setting
work!
6.4.1 Set speeds on electric axes
The speeds of the electric axes are usually specified by the higher-level control
system. For this purpose, there are sample programmes for many common
controllers with which the maximum speed, acceleration and the target position
can be specified.
These programmes are stored on the CD supplied or can be downloaded from
https://www.afag.com/de/service/support-tools/linmot.html .
CAUTION
Danger of material damage and personal injury due to improperly
performed adjustment work!
Improperly carried out activities can result in considerable material damage
and serious injury.
Only use trained specialist personnel to carry out the activities.
NOTICE
Risk of damage to property!
Excessive speed or acceleration can cause damage to the unit or peripherals.
Observe the permissible values!
