Fault elimination
Assembly instructions
DE
EPS Handling systems
Date 08.09.2021
Version 2.0
99–112
7 Fault elimination
7.1 Safety instructions for troubleshooting
Also observe the safety instructions in
chap. 2 „Safety instructions“ in this
manual.
7.2 Fault causes and remedy
In the event of malfunctions that could affect safety, the system must be shut
down
immediately
and secured against being switched on again.
The fault must then be eliminated immediately!
DANGER
Danger! Risk of electric shock!
If work on electrical components is required, ensure that the work is carried
out properly, failure to do so will cause serious or fatal injuries.
Work on the machine's electrical equipment may only be performed by
skilled electrician or trained personnel under the supervision of a skilled
electrician in accordance with all relevant electrical regulations.
WARNING
Danger of injury due to faulty troubleshooting!
Poorly performed troubleshooting work can lead to serious injuries and
damage to property.
Only use trained specialist personnel for troubleshooting.
All work on the modules must be carried out with the power supply cut off!
WARNING
Risk of injuries due to uncontrolled parts movements!
Signals from the control system can trigger unintentional movements of the
EPS, which can cause injury.
Before starting any work on the EPS, switch off the control unit and secure
to prevent it from being switched on.
Observe the operating instructions of the controller used!
