Transport, packaging and storage
Assembly instructions
DE
EPS Handling systems
Date 08.09.2021
Version 2.0
77–112
4 Transport, packaging and storage
4.1 Safety instructions for transport
Also observe the safety instructions in
chap. 2 „Safety instructions“ in this
manual.
4.2 Transport
No liability can be assumed for damages caused by improper installation on
the part of the operating company.
The following conditions must be complied with for transport and storage:
Storage temperature: 0-50 °C
Relative air humidity: < 90%, non condensing
4.3 Packaging
The EPS system is transported in the Afag transport packaging. If no Afag
packaging is used, the EPS system must be packed in such a way that it is
protected against shocks and dust.
The packaging materials used are mainly cardboard and paper or PE film.
These are materials that can be recycled worldwide.
If the packaging is returned to us carriage paid, Afag will take it back free of
charge and dispose of it properly.
NOTICE
Risk of damage to property!
EPS systems are precision mechanical devices and can be damaged by
incorrect handling.
EPS systems must be packed, transported, unpacked and stored with the
necessary care and cleanliness.
NOTICE
Risk to the environment due to incorrect disposal of the packaging
material
Environmental damage can be caused by incorrect disposal of the packaging
material.
Dispose of the packaging material in an environmentally sensitive way in
accordance with the local environmental regulations.
