®
Label Qty.
Description
Part Number
A
1
Module
05-46401
B
1
Wire Harness
N/A
C
1
Key Fob
N/A
D
1
Antenna Unit
N/A
E
1
Module Bracket
05-60110
Installation will require the following tools:
T20 Torx (Furnished), Phillips Screw Driver & 1/4" Nut Drive
Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public
streets or highways is strictly prohibited in California and others states that have adopted California
emission regulations.
• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 951-493-7100.
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
• Disconnect the negative battery terminal before proceeding.
• Retain factory parts for future use.
Page 2
