background image

WARNING

NEVER FORGET TO LOCK THE 

CASTOR WHEELS

DESCRIPTION:

The Advanced Guard Rail method:

The Advanced Guardrail (AGR) method is one of the two permitted ways of assembling a tower 

while safeguarding the Scaffolder from the risk of falling. 

An AGR tower uses prefabricated frames to provide structural rigidity and stability to the tower 

instead of using the horizontal and diagonal braces used for the same purpose in the traditional 

3T assembly method. 

As each new level is added onto a tower, the scaffolder first installs the AGR frames and tower 

frames from a safely guarded platform below. Once the AGR frames are in place, platforms for 

the next level are installed such that the two uppermost horizontal rungs on the AGR frames 

form the midrail and guardrail above the platform level. This process repeats until the tower 

reaches the required height.

Compliances:

The Affix 

MADW

 Mobile Tower has been tested and certified to 

EN1004-1:2020

 by 

TUV, India

.

The Affix 

MADW

 Series Mobile Tower are versatile and user-friendly aerial solution for all 

access needs. It gives a work platform for use by a maximum of two people, with weight evenly 

distributed across the platform. The tower can be easily erected and with highly customizable 

assembly it meets almost all the site constraints and provides safe and efficient working 

platform. The key safety feature is the smart locking claws provided for the horizontal and 

diagonal bracings. It allows an instant lock-up performed by single hand use, however, with the 

reverse unlocking plug, two hands are needed to unplug the bracing.

The information and instructions included in this manual are provided to help get the best 

possible service from your 

MADW

 Series Mobile Tower. This user guide provides you with step 

by step instructions to ensure your system is assembled easily and safely, using the 

AGR

 

(Advanced Guard Rail method.

02

Summary of Contents for MADW 1020-AGR





















Reviews: