SECOND LEVEL
Insert both the
2nd level 4 Rung Span
Frame and the 4 Rung Ladder Frame
on
the respective sides into the corresponding
spigots.
For clamping instructions refer to
the
Clamping Instructions section on
Page 12.
Step 3.1
Step 3.1
Step 3.2
Step 3.2
Step 4.1
Step 4.1
Hook the Diagonal Brace to the
1st Rung
of the 1st level
Span frame
at one end and
the other end should be hooked to the 1
st
Rung
of the 2nd level
Ladder frame
.
Step 4.2
Step 4.2
Hook the
2nd
Diagonal Brace to the
1st
Rung
of the 2nd level
Ladder frame
at one
end and the other end should be hooked
to the
1st Rung
of the 1st level
Span frame
.
Step 4
Step 3
One person should hold the frame in upright
position during this step.
Step 4.3
Step 4.3
Level the structure using a Spirit Level on
the Rungs and the braces. Adjust using
the adjustable jack.
07
ASSEMBLY
