19
18
S
13
3
14
R
6
15
ASSEMBLY
STEP 8
A
Open
HARDWARE FOR STEP 7
.
B
Slide
TOP CAP REAR COVER (14)
over
CONSOLE MAST (6)
and attach using
2
SCREWS (R)
.
C
Slide
TOP CAP FRONT COVER (15)
over
CONSOLE MAST (6)
and snap into place.
D
Slide
REAR CAP (13)
over
REAR
STABILIZER (3)
and attach using 3
SCREWS (S)
.
HARDWARE FOR STEP 8
PART
TYPE
QTY
R
SCREW
2
S
SCREW
3
ASSEMBLY
STEP 9
7
16
19
18
20
17
11
6
NOTE: All hardware for this step is pre-installed.
A Remove 4
PRE-INSTALLED BOLTS (16)
from the
CONSOLE (17)
.
B Attach the
CONSOLE CABLES (7)
to the
CONSOLE (17)
.
C Carefully tuck the
CONSOLE CABLES (7)
into the
CONSOLE MAST (6)
before attaching the
CONSOLE
.
Attach
CONSOLE (17)
to
CONSOLE MAST (6)
using
4
PRE-INSTALLED BOLTS (16)
.
D Slide the
HANDLEBAR BOOT (18)
halfway up
the
UPPER HANDLEBAR (19)
. Slide the
UPPER
HANDLEBAR (19)
onto the
LOWER HANDLEBAR (11)
making sure handlebars are joined together completely.
Secure the
UPPER HANDLEBAR (19)
to the
LOWER
HANDLEBAR (11)
using
PRE-ATTACHED SET
SCREWS (20)
.
E Repeat STEP D on other side.
NOTE: Make sure upper handlebars are as far down as
possible. Handlebars can be damaged If not secured correctly.
ASSEMBLY COMPLETE!
NOTE: Do not to pinch any wires while attaching the console.
3.3AE HANDLEBAR
5.3AE/7.3AE
HANDLEBAR
AFG14_3.3AE_5.3AE_7.3AE_OM_r1_4.indd 18-19
5/20/14 9:12 AM
