6
7
Section 3: Operating Instructions
Setup
1 Select the appropriate adapter
cap and affix to the adapter
cap mount.
2
!
Use an Optical Power
Meter to verify the fiber optic
connector to be inspected is
not “live”.
Note:
The OFS 300 includes
a KG3, 40 dB IR Safety Filter.
3 Connect the cable to be inspected by the OFS 300 to the adapter cap.
Optional:
If the
opposite end of the cable is accessible, it may be placed into the Illumination Port (see
Figure 1) to illuminate the fiber core for viewing.
4 Press the ON button with one hand while adjusting the Focus Knob with the other
hand.
�������
�����������
� � �����
�������
Power button
Focus knob
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com