2
INSTALLATION INSTRUCTIONS
OptiNID
®
500 Optical Demarcation Closure
© 2017, AFL, all rights reserved. Revision A, 2.16.2017
Specifications are subject to change without notice.
GENERAL
The OptiNID 500 Optical Demarcation Closure (OPN-500) is designed for installation in either indoor or outdoor
environments. The closure is equipped with an integrated splice tray which will hold up to six single fusion splices.
The closure will house one LGX
®
118 adapter plate allowing for up to six bulkhead connections. The OPN-500 may
be either wall or pole mounted and the small form factor makes it ideal for FTTx demarcation applications.
SPECIFICATIONS
Parameter
Value
Dielectric Strength
Minimum 2500Vrms for 1 minute
High Temperature Storage/Mold Stress °F (°C)
14 Days at 159 (70.55)
Temperature Cycling with Humidity °F (°C)
150 Days Cycling from 40 - 140 (4.44 - 60) with 95% RH
Impact Test °F (°C)
-40 (-40), 5ft/lbs on all external surfaces
Drop Test °F (°C)
-40 (-40), 5ft onto concrete surface four times
Rain
24 hours at 10 psi
UV Resistance (Days Exposed)
60 per ASTM-G26-84
Salt Fog (Days Exposed)
60 per ASTM-BLL-90
Flammability
UL95-5V
Chemical Resistance
30 Days at 100°F and 95% RH
Resists chipping and/or cracking when subjected to house
paint, wasp spray, sulfuric acid, kerosene and sodium hydroxide
Material
UL
®
Listed Flame Retardant Thermoplastic Alloy
Dimensions (H x W x D) in. (cm)
6.3 x 7.8 x 2.0 (15.7 x 19.7 x 5.0)
Cable Entrance in. (cm) diameter - Input
1 x 3/4" NPT (1.130"); 2 x 1/2" NPT (0.875")
Covers
Standard, molded-in snap finger and "F" termination
PACKAGE CONTENTS
A. OPN-500 Optical Demarcation Closure
B. Adapter Plate (Optional)
