6
OPERATION
NOTICE
When the heat function is used for the first time, a slight odor may be
present. This is normal and should not occur again unless the heater
is not used for an extended period of time.
BUTTON
ACTION / FUNCTION
INDICATION / RESULT
ON/OFF
1. Press to turn on flame effect and
enable heater.
Heater switches will not work unless
this switch is turned on.
2. Press again to shut off the power to
all functions.
1. Flame effect and power light on
switch turn on.
The heater is now enabled.
2. Power lights, heaters, and
flame effect turn off.
LOW
HEAT
1. With power turned on, press to turn
on low heat (900W).
Low heat must be on to use high heat.
2. Press again to turn off low heat.
1. Heater and fan turn on low
(900W).
2. Low heat and fan turn off.
Flame stays on.
HIGH
HEAT
1. With power and low heat turned on,
press to turn on high heat (1950W).
Low heat must be on to use high heat.
2. Press again to turn off high heat.
1. Heater and fan turn on high
(1950W).
2. High heat and fan turn off. Low
heat and flame stay on.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach
an unsafe temperature, the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF.
3. Wait 5 minutes.
4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or
lint. If they are, use a vacuum to clean the vent areas.
5. With the POWER switch in the OFF position, plug the power cord back into the
outlet.
6. If the problem continues, have your outlet and wiring inspected by a professional.
CARE AND MAINTENANCE
ALWAYS
turn the heater
OFF
and
unplug the power cord from the outlet
before cleaning, changing the light bulbs, or moving this stove. Failure to do
so could result in
electric shock, fire, or personal injury
.
www.aflamo.pl/en/
